Universal Flow Monitors Products
FlowStream Mass Flowmeter for Gas
FlowStream Mass Flowmeter for Gas
Laminar Flow Element differential pressure flowmeters are good for clean, dry, non-corrosive, non-condensing gases. Corrected for temperature and pressure, it has a mass flow output. Common applications include Laboratory R&D, shielding gas for arc welding, air flow for robotics, methane flow to fuel cells and plasma coating.
- 1/8 - 3/4 inch
- LCD display
- Serial Data, Current, voltage or pulse out
- Battery Powered option
- Intrinsic safety option
- Rapid response
- Type 4 construction (weather proof)
- Built-in alarm switches
- All common non-aggressive gases such as air, nitrogen, argon, helium, carbon dioxide, oxygen, hydrogen, methane
Explosion-Proof Control Box Enclosure

Explosion-Proof Control Box Enclosure
Vane Variable Area Flowmeters
Vane Variable Area Flowmeters - Economical Standard
- Simple mechanical flow indication
- Mechanical switch
- 4-20 mA transmitter
- 4-20 mA transmitter with HART
- Visual LCD local
- General purpose for chemicals, brine
- Special units for water or oil
- Order oil by ISO fluid number
Inline Piston Flowmeters
Inline Piston Flowmeters - Enhanced Accuracy, Range and Pressure
- 2% FS accuracy (1/% available for flow rate of 1 GPM and higher)
- Max Liquid Pressure 500 PSI (34.48 Bar) or 1500 PSI (103.42 BAR)
- 10:1 turn down ratio
- Simple mechanical flow indication
- Mechanical switch
- 4-20 mA transmitter
- 4-20 mA transmitter with HART
- Visual LCD local
- General purpose for chemicals, brine
- Special units for water or oil
- Order oil by ISO fluid number
Piston VA Flowmeters for Offset Piping Requirements
Piston VA Flowmeters for Offset Piping Requirements
- Simple mechanical flow indication
- Mechanical switch
- 4-20 mA transmitter
- 4-20 mA transmitter with HART
- Visual LCD local
- General purpose for chemicals, brine
- Special units for water or oil
- Order oil by ISO fluid number
CoolPoint Vortex Shedding Flowmeters
CoolPoint Vortex Shedding Flowmeters
UFM vortex shedding flowmeters are designed for coolant or water flow. They come in ¼ to 4 inch pipe sizes with a temperature transmitter option available in ¾ to 4 inch sizes. Suitable for low viscosity corrosive fluids with our 316 Stainless Steel body and Kalrez seal options. Cost a lot less than mag meters and are okay with high particulate.
- Rate
- Total
- 4-20 mA
- Bright LED
- 2 wire with IS optional
- No moving parts
- Flow/temp optional
- Switch or pulse optional
- 316 SS optional
- Simple, reliable and inexpensive
Insite Transparent Flowmeters
Insite Transparent Flowmeters
Universal offers variable area flowmeters made of see-through plastic with metal or plastic port adapters that allow you to see your fluid. These are used for water, compressed air, dilute chemicals (such as those used in water treatment), and de-ionized water.
- Water
- Ultrapure water
- Dilute chemicals used in municipal water treatment
- Compressed air
- Mounts in any position
- Electric switches available
- Cost effective
Modular Sensor Manifold - High Pressure Coolant Flow Monitoring
Modular Sensor Manifold Flowmeters
The Rugged and Compact Manifold design of the MSM flow meter is used for monitoring high pressure applications such as gun drilling, reaming, and CNC machining water and coolant.
- Fast Response time reduces tool breakage
- Two Programmable (open collector) Set Points
- LED Set Point Alarm Indicators
- 4-20 mA transmitter of flow rate
- Integral or Remote LCD Display
- Type 4 Enclosure, Weatherproof
- Operating Pressure up to 2000 PSIG
- Easy to install, operate, and maintain
Aalborg Mass Flow Meters

Mass Flow Meters:
- Rigid metallic construction.
- Maximum pressure of 1000 psig (70 bars).
- Leak integrity 1 x 10-9 of helium.
- NIST traceable certifi cation.
- Built-in tiltable LCD readout.
- 0-5 Vdc and 4-20 mA signals.
- Circuit protection.
- Can be used as a portable device.
- Engineering units or 0 to 100% displays.
- TIO Totalizer option.
FLOMEC® Battery Operated Turbine and Magnetic Flow Meters

Turbine and Magnetic Flow Meters
- A full line of FLOMEC® G2 Series Precision Turbine Meters are available in a variety of housing materials.
- FLOMEC® TM Series Water Meters are accurate, economical and durable.
- The QSE Mag Series is a dependable highly accurate electromagnetic flowmeter designed for flow and usage monitoring in commercial applications.
TI In-line Turbine Meters
In-line turbines, installed within a length of pipe, and wafer turbines, for insertion between two pipe flanges. Our in-line and wafer-style turbine meters are ruggedized, stainless steel, precision machined, offered with CD4MCu and/or 416 stainless steel rotors.
- 1/2 - 10 inch
- Stainless Steel Body
- Flanged, Victaulic® (grooved), or threaded Connection
- NIST, CRN Certification
Insertion Paddlewheel Flow Meters
Paddlewheel Flow Meters
Available in Polypropylene and PVDF, the GF Signet paddlewheel flow meters are ideal for a variety of applications including chemical processing, water, and wastewater monitoring scrubber control.
- Low power and high resolution
- DN15 to DN900 (0.5 to 36in) pipe sizes
- Polypropylene or PVDF wetted materials
- Low flow capabilities down to 0.3ft/s (0.1m/s)
- Built-in user interface for on-site configuration
- CE, FCC, and UL approvals
Insertion Electromagnetic Flow Sensors
Electromagnetic Flow Meters
Available in Polypropylene and PVDF, the GF Signet electromagnetic flow meters are ideal for a variety of applications including chemical processing, water, and wastewater monitoring scrubber control.
- No moving parts
- DN15 to DN900 (0.5 to 36in) pipe sizes
- Polypropylene or PVDF wetted materials
- Low flow capabilities down to 0.15ft/s (0.05m/s)
- No pressure drop
- Accurate measurement even in dirty liquids
- Bi-directional flow
- Empty pipe detection
- CE, FCC, and UL approvals
Low Cost Compressed Air Meter
Low cost compressed air meter
Our most popular thermal dispersion flowmeters, offered at a low cost ideal for installation in an air distribution system. 5000 Series (standard) and 6000 Series (ruggedized) are both available in a variety of sizes for steel and copper pipe.
- Reliable mass flow technology
- Milliamp and pulse outputs
- Available 1/2 to 8 inches
- No calibration or setup required
- Complete flowmeter in one package
- 100:1 turndown capability
Rocon Resistance Welding Tip Loss Flow Monitors
Deltapoint® detects leaks from cap loss, hose burst or inadvertent shutoff. Monitors robotic cells, pedestal welders or multiple work cells in resistance welding circuits, thus assuring quality welds.
- Shuts water off to stop the leak
- Sends alarm to robot controllers/PLC/monitoring systems upon fault detection
- Stand-alone package reduces installation cost
- No moving parts so unit unaffected by dirty water eliminating nuisance tripping
- Minimal operating cost
- No training required