3/4" - 2" Vortex Shedding Flowmeter for 25 - 200 GPM Corrosives (CP/CN with 316 Stainless Steel Body)

Select your product options below

3/4" - 2" Vortex Shedding Flowmeter for 25 - 200 GPM Corrosives (CP/CN with 316 Stainless Steel Body)

Medium Vortex Shedding Flowmeters with Stainless Body for Corrosives (CP/CN)

This flowmeter is made for corrosive applications of low viscosity fluids. There are no moving parts to clog or wear. They are certified CSA and CE. They have a 4-20 mA output. There are two versions. The three wire version (power supplied separate from the 4-20) has a solid state relay that can be configured as an alarm or as a pulse out. It has a bright LED digital display of flow rate. The two wire version (option E14) has no display, pulse out or alarm point. It can be operated in an intrinsically safe mode only when used in conjunction with an approved intrinsic safety barrier meeting required entity parameters.

Flow bodies of brass or 316 Stainless Steel with PVDF sensors and Viton® seals standard and these flowmeters have the following characteristics and/or options:

• Input Power: 10 - 30 VDC @ 80 mA standard, 25 mA for the 2 wire option
• Output: 4-20 mA for flow rate
• 100 pulses per gallon from the solid state relay for 3 wire (standard) option
• PEEK sensors used for high temp for fluids above 150° F.
• Electrical Connection:
• Pin Connector (standard)
• Pigtails (optional)
• Junction Box with terminal strip (optional)
• Features that are selectable on the 3 wire standard 4-20 mA units include:
• Selectable alarm state (N.O. or N.C.)
• Set point or pulse output
• Engineering units (GPM, LPM)