Help with this selection
By saving your product specs, you will also gain access to your local distributor contact information.
Need help choosing options?Call 248.542.9635
UFM’s medium series vane-style variable area flowmeters (MN, MM & MH models) operate with a spring biased semi-circular vane that opens wider with more flow. They are installed in-line in any position. Straight pipe run before or after the meter is not required. The simple mechanical connection directly drives pointers, switches and transmitters.
The MN, MM and MH flowmeters use the vane style variable area technology to measure the flow of liquids and have the following characteristics and/or options:
Maximum flow rates from 10 – 160 GPM (60 – 600 LPM)Pressure ratings 0 to 300 PSI (20 BAR) for MN, 500 PSI (34 BAR) for MM and 2000 PSI (137 BAR) for MHMaximum fluid temperature of 200˚F (95˚C) High temperature option of 400°F for A and R Box, 300°F for transmitter Accuracy: 2% full scaleRepeatability: 1% of actual flowStandard outputs: mechanical switch, visual pointer and scale, 4-20 mAOptional outputs: IS transmitter, explosion proof switches Materials of construction available include brass, 316 SS, aluminum, etc. Applications supported: water, lubrication oil, corrosives, brine and general CSA Certified NRTL/CCE Marked (as noted)NIST Traceable Calibration Certificate available.
Standard 2 wire, loop-powered 4-20 mA DC analog signal flow rate transmitter. 10 to 30 VDC, 25 mA input.
The Highway Addressable Remote Transducer protocol is a digital industrial automation protocol that can communicate over legacy 4-20 mA analog instrumentation wiring and is known by its acronym HART. Due to the huge installed base of 4-20 mA systems throughout the world, the HART protocol is one of the most popular industrial protocols today and is now available in all UFM variable area products
"A" box is selected for price and simplicity. It holds switches (general purpose and hermetically sealed) or 4-20mA transmitter. You get this control box when you order any CONTROL BOX & READOUT starting with an "A". This control box is made of Polysulfone (standard low cost "A") with options for aluminum ("L") or 316 stainless steel ("Z").
"R" box is selected for greater resolution (more increments on the inscribed scale). It holds switches (general purpose and hazardous location all classes groups and divisions) and 4-20mA transmitter. Switch (standard service) and transmitter are offered in this control box together when signal redundancy is desired. You get this control box when you order any CONTROL BOX & READOUT starting with an "R". This control box is made from epoxy coated aluminum.
"T" box is selected for availability of two isolated junction boxes with terminal strips. This means that no direct wiring to switches or transmitters is required. Digital LCD display of flow is optional ("TXL"). It holds switches (general purpose) and 4-20mA transmitter. Switch (standard service) and transmitter are offered in this control box together when signal redundancy is desired. These are wired to separate junction boxes for signal isolation. You get this control box when you order any CONTROL BOX & READOUT starting with a "T". This control box is made from epoxy coated aluminum.