Low Cost Compressed Air Meter

Low Cost Compressed Air Meter

CDI 6200 flowmeters make localized metering of air usage a practical way to manage a compressed-air system. Thermal-dispersion mass-flow technology gives the meter sensitivity to low leakage flows, while an innovative mounting design makes it easy to install.

  • NEMA 4 (IP67) enclosure
  • Surge suppression; suitable for distributed DC power
  • Ruggedized version of CDI-5200
  • Suitable for use in wet locations
  • Mass flow measurement via thermal dispersion
  • Built-in LED display
  • Milliamp and pulse outputs
  • CE certified and RoHS compliant
  • No calibration required
  • Separate power supply required

Available for

  • Steel pipe 1/2" through 1.5"
  • Steel pipe DN15 through DN40
  • Copper pipe 3/4" through 1.5"
  • Common metric aluminum sizes
Price: Starting at $495.00
Select Options

CDI 5400 flowmeters make localized metering of air usage a practical way to manage a compressed-air system. Thermal-dispersion mass-flow technology gives the meter sensitivity to low leakage flows, while an innovative mounting design makes it easy to install.

  • The original CDI flowmeter
  • Mass flow measurement via thermal dispersion
  • Built-in LED display
  • Wall-plug power supply included
  • Quick, easy wiring and installation
  • Milliamp and pulse outputs
  • CE certified and RoHS compliant
  • No calibration required

Available for:

  • Steel pipe 2" through 8"
  • Steel pipe DN50 through DN200
  • Copper pipe 2" through 4"
  • Common metric aluminum sizes

 

Price: Starting at $645.00
Select Options

CDI 6400 flowmeters make localized metering of air usage a practical way to manage a compressed-air system. Thermal-dispersion mass-flow technology gives the meter sensitivity to low leakage flows, while an innovative mounting design makes it easy to install.

  • NEMA 4 (IP67) enclosure
  • Surge suppression; suitable for distributed DC power
  • Ruggedized version of CDI-5400
  • Suitable for use in wet locations
  • Mass flow measurement via thermal dispersion
  • Built-in LED display
  • Milliamp and pulse outputs
  • CE certified and RoHS compliant
  • No calibration required
  • Separate power supply required

Available for:

  • Steel pipe 2" through 8"
  • Steel pipe DN50 through DN200
  • Copper pipe 2" through 4"
  • Common metric aluminum sizes
Price: Starting at $695.00
Select Options

The CDI 25 is designed for low-cost measurement of air usage at every piece of equipment in an industrial plant.

A minimum-flow alarm indicates leakage by blinking if flow does not drop below a specified level. An average-flow alarm indicates excessive usage. These alarm functions draw attention to waste without requiring central monitoring.

  • Rate, Minimum, Average, and Total display options
  • User-adjustable minimum-flow and average-flow alarms
  • Alarms indicated by blinking LEDs
  • Mass flow measurement via thermal dispersion
  • Built-in LED display
  • CE certified and RoHS compliant
  • No calibration required

Available for:

  • Steel pipe 1/2", 3/4", and 1"
  • Copper pipe 3/4" and 1"
Price: Starting at $295.00
Select Options

Remote display, daily usage display, or an accumulator for all CDI 5200 or 5400 flowmeters.

  • When a meter is mounted where it cannot readily be seen or where it may not be noticed, the remote display repeats the output of the meter at a convenient location, up to 200 feet from the meter.
  • When it is desired to track air usage over time, the display, in its summing mode, shows accumulated usage or, alternatively, total usage during the most recent full day.
  • The display can be programmed to select the desired mode of operation, and labels are furnished to indicate which mode is being used.
Price: Starting at $95.00

Used with CDI 5200 or 5400. Provides a moving average of the flow rate over a user-specified averaging period.

  • When a meter is mounted where it cannot readily be seen or where it may not be noticed, the remote display repeats the output of the meter at a convenient location, up to 200 feet from the meter.
  • When it is desired to track air usage over time, the display, in its summing mode, shows accumulated usage or, alternatively, total usage during the most recent full day.
  • The display can be programmed to select the desired mode of operation, and labels are furnished to indicate which mode is being used.
Price: Starting at $95.00

Remote display, daily usage display, or an accumulator for all CDI 6200 or 6400 flowmeters.

  • When a meter is mounted where it cannot readily be seen or where it may not be noticed, the remote display repeats the output of the meter at a convenient location, up to 200 feet from the meter.
  • When it is desired to track air usage over time, the display, in its summing mode, shows accumulated usage or, alternatively, total usage during the most recent full day.
  • The display can be programmed to select the desired mode of operation, and labels are furnished to indicate which mode is being used.
Price: Starting at $120.00

Used with CDI 6200 or 6400. Provides a moving average of the flow rate over a user-specified averaging period.

  • When a meter is mounted where it cannot readily be seen or where it may not be noticed, the remote display repeats the output of the meter at a convenient location, up to 200 feet from the meter.
  • When it is desired to track air usage over time, the display, in its summing mode, shows accumulated usage or, alternatively, total usage during the most recent full day.
  • The display can be programmed to select the desired mode of operation, and labels are furnished to indicate which mode is being used.
Price: Starting at $120.00
Documents

This universal guide is for use with all CDI-25, 5200 and 6200 meters (pipe sizes 1.5" or less). It includes a 3/16" drill bit, 3/16" and 1/4" hex wrenches, and an aluminum drill guide with two 3/16" drill bushings spaced 2.250" apart. These guides can be attached to the pipe with a band clamp, a C-clamp or a chain clamp.

Price: Starting at $65.00

This universal guide is for use with all CDI-5400 and 6400 meters (pipe sizes 2" or greater). It includes a 3/16" drill bit, 3/16" and 1/4" hex wrenches, and an aluminum drill guide. These guides can be attached to the pipe with a band clamp, a C-clamp, or a chain clamp.

Price: Starting at $95.00

This guide is for use with 2" (50 mm) and 2-1/2" (63 mm) CDI-5400 and 6400 flow meters. It includes a 3/16" drill bit, a 5/16" hex wrench, and an aluminum drill guide and is a cheaper option than the universal guide if you're only working with these specific pipe sizes. These guides can be attached to the pipe with a band clamp, a C-clamp, or a chain clamp.

Price: Starting at $65.00

These half-ring drill guides are for use with specific sizes of CDI-5400 and 6400 meters (3" or larger). They attach to the pipe by bolting into the rear half-ring that comes with the meter. They include a 3/16" drill bit, a 5/16" hex wrench, and a half-ring of the appropriate size to match your meter. When ordering, specify "XXX" to match your meter size (either 30C, 30S, 40C, 40S, 50S, or 60S). Guides for 4" pipe or smaller are $65, for 5" and 6" pipe are $95.

Price: Starting at $65.00

If you ever want to move or remove your CDI flowmeter, these rings plug and cover the holes that are left behind.

Price: Starting at $95.00
Displaying 1 to 19 (of 19 products)


View Available Products
Close
Loading...