¾ inch port DeltaPoint Manifold for 6-12 GPM with two flow sensors (DPM)

Unfortunately, our product configuration app doesn't work in your browser. Here's how you can still order: quickly upgrade your browser to order online or call (248) 542-9635 to order by phone.

Select your product options below

¾ inch port DeltaPoint Manifold for 6-12 GPM with two flow sensors (DPM)

Select the options for your ¾ inch port DeltaPoint Manifold for 6-12 GPM with two flow sensors (DPM) below:
¾ inch port DeltaPoint Manifold for 6-12 GPM with two flow sensors (DPM)
Price of Current Selection: $1,675.00
Quantity:

By saving your product specs, you will also gain access to your local distributor contact information.

Need help choosing options?
Call 248.542.9635

Deltapoint® Manifold is a modular designed unit that detects leaks from cap loss, hose burst or inadvertent shutoff. Monitoring of robotic cells, pedestal welders or multiple work cells. No need to interrupt plumbing to replace unit. Water is shut down to stop the leak and a signal is sent to the controller. Available with WET (Water Extraction Technology) cap change vacuum system

  • Two ¾ inch ports to connect to the water header. Top or bottom feed
  • Two ¾ inch ports to connect to the integral weld gun
  • Available flow range: .6 - 6GPM (2.3 - 23LPM), and 1.2 - 12GPM (4.5 - 45LPM)
  • Stand-alone package for installation ease
  • Sensor has no moving parts to wear, break or cause nuisance tripping
  • Visual flow indication reads in GPM or LPM
  • Visual temperature indication reads in degrees F or C
  • User programmable: Leak rate alarm, response time, restart delay, flow OK level, temperature fault level and minimum flow monitoring
  • Bypass - Electrical & Mechanical
  • Available Versions: DeviceNet, Ethernet and Profinet
  • Water/Glycol coolant up to 20% mix
Close
Loading...